The Rolex Submariner is an iconic luxury watch known for its durable design, precise timekeeping, and distinctive style. As with any mechanical watch, setting the time and date on your Rolex Submariner can be a bit tricky if you are unfamiliar with the process. Fortunately, with a few simple steps, you can set your Submariner accurately and easily. In this article, we will guide you through the process of setting your Rolex Submariner, step by step.
Step 1: Unscrew the Crown
The first step in setting your Rolex Submariner is to unscrew the crown. The crown is the small knob located on the side of the watch that is used to wind the watch and adjust the time and date. To unscrew the crown, gently grasp it between your thumb and index finger and turn it counterclockwise until it pops out slightly. Be careful not to pull the crown out too far as it may damage the watch.
Step 2: Wind the Watch
Once the crown is unscrewed, you can wind the watch by turning the crown clockwise. Keep turning the crown until it feels firm and cannot be wound any further. If the watch has stopped, you will need to wind it at least 15-20 times to get it started again.
Step 3: Set the Time
To set the time on your Rolex Submariner, gently pull the crown out to the second position. You will feel a slight click as the crown moves into this position. The second position is used to adjust the time, while the first position is used to adjust the date. To set the time, turn the crown clockwise or counterclockwise until the hands on the watch display the correct time. Make sure to set the time to the correct AM or PM.
Step 4: Set the Date
To set the date on your Rolex Submariner, gently pull the crown out to the first position. You will feel a slight click as the crown moves into this position. The first position is used to adjust the date. To set the date, turn the crown clockwise or counterclockwise until the date on the watch display the correct date. Keep in mind that the date changes at midnight, so be careful not to set the date during this time as it may damage the watch.
Step 5: Push the Crown in and Screw it Down
Once you have set the time and date on your Rolex Submariner, gently push the crown back in until it is flush with the side of the watch. Then, turn the crown clockwise to screw it down tightly. This will help to ensure that the watch is water-resistant and prevent any moisture from entering the watch.
Setting the time and date on your Rolex Submariner is a simple process that can be done by anyone with a little bit of patience and attention to detail. By following the steps outlined in this article, you can ensure that your watch is always set accurately and ready to wear. Remember to take care when handling your Rolex Submariner, as it is a delicate instrument that requires careful attention and care to keep it running smoothly. With proper maintenance and care, your Rolex Submariner can last a lifetime and become a cherished family heirloom.
