The Rolex Submariner is a classic and iconic watch that has been a favorite of divers and watch enthusiasts for generations. The Submariner features a date display and a rotating bezel that can be used to time dives, among other things. However, setting the time on a Rolex Submariner can be a bit tricky if you’re not familiar with the process. Here’s a step-by-step guide to help you set the time on your Submariner.
Step 1: Unscrew the Crown
The first step in setting the time on your Rolex Submariner is to unscrew the crown. The crown is the small knob on the side of the watch that is used to wind the watch and set the time. To unscrew the crown, gently turn it counterclockwise until it pops out slightly.
Step 2: Pull Out the Crown
Once the crown is unscrewed, you can pull it out to the second position. This will allow you to set the time. To do this, gently pull the crown out until you feel a click.
Step 3: Set the Hour and Minute Hands
Now that the crown is in the second position, you can set the hour and minute hands. To set the hour hand, turn the crown clockwise or counterclockwise until the desired hour is displayed on the watch face. To set the minute hand, turn the crown clockwise or counterclockwise until the minute hand is pointing to the correct minute.
Step 4: Reset the Seconds Hand
Once the hour and minute hands are set, you will need to reset the seconds hand. To do this, pull the crown out to the third position and turn it clockwise until the seconds hand reaches the 12 o’clock position. Then, push the crown back in to the second position.
Step 5: Screw the Crown Back In
Finally, you will need to screw the crown back in to ensure that the watch is water-resistant. To do this, gently push the crown back in and turn it clockwise until it is snug. Be careful not to overtighten the crown, as this can damage the watch.
In conclusion, setting the time on a Rolex Submariner is a relatively simple process once you know how to do it. By following these steps, you can ensure that your Submariner is always set to the correct time and ready for your next dive or adventure. Just remember to be gentle with the crown and not to overtighten it, as this can damage the watch.
